How to Clean and Maintain Your Automatic Pet Waterer
Keep your pet’s water fresh and your dispenser running like new
Automatic pet waterers are a game-changer for busy pet owners. They ensure your furry friends always have access to clean, flowing water — but like any device, they require regular cleaning and maintenance. Without proper care, bacteria, mould, and mineral buildup can affect water quality and shorten the lifespan of the unit.
In this guide, we’ll walk you through the best practices for cleaning, maintaining, and replacing filters for your pet’s waterer — so your companion stays healthy, and your investment lasts longer.
🧼 Step-by-Step: How to Clean Your Automatic Pet Waterer
Whether you use a 2.2L FT666, 4.5L Rechargeable FT999, or a 7L Stainless Steel FT00703, the core cleaning process is similar.
🧽 What You’ll Need:
-
Mild dish soap
-
A small brush (like a bottle brush or old toothbrush)
-
Warm water
-
Clean towel or paper towels
🕒 Recommended Cleaning Frequency:
-
Water container: Every 2–3 days
-
Filters & internal components: Weekly
-
Full unit deep clean: Every 1–2 weeks
💧 Cleaning Process:
1. Unplug and Disassemble
Always unplug rechargeable units like the FT999 before cleaning. Remove the water tank, filter, and any pump or fountain attachments.
2. Wash the Tank and Base
Use warm, soapy water to clean the water tank and base thoroughly. For models like the FT666 Clear, this helps maintain visibility and prevents water stains.
3. Scrub Small Parts
Use a brush to clean hard-to-reach areas like the filter compartment, pump housing, and spouts. This is especially important for multi-part units like the Stainless Steel FT00703.
4. Rinse Thoroughly
Ensure no soap residue remains — rinse all parts under running water.
5. Dry Completely
Use a clean towel to dry all parts before reassembling to avoid mildew or odour build-up.
🔄 How to Replace Filters (and When)
Using a filter helps remove debris, odour, and impurities — but only if it’s replaced regularly.
⏳ When to Replace:
-
Every 3–4 weeks (or sooner if water flow slows down or appears dirty)
🛒 Compatible Filters:
-
FT666 Models: Filter Replacement for FT666 (4-Pack)
-
FT999 Models: Filter Replacement for FT999 (4-Pack)
🧼 Replacing the Filter:
-
Remove the used filter and discard it.
-
Rinse the new filter under cold water for 1 minute to remove loose charcoal.
-
Insert it as per your model’s manual (usually in the pump housing or below the water tray).
🔋 Extra Care for Rechargeable Units (Like FT999)
For Rechargeable Wireless Automatic Pet Waterers, avoid letting the battery completely drain before recharging. Clean the charging area gently with a dry cloth and avoid contact with water.
🛡️ Maintenance Tips to Extend the Life of Your Waterer
✅ Use filtered water: It reduces mineral build-up and helps the filter last longer.
✅ Check the water level daily: Keeps the motor from running dry.
✅ Descale with vinegar (monthly): Especially useful for hard water areas.
✅ Store indoors: Avoid outdoor use to prevent exposure to dirt and bacteria.
💬 Need Help with Your Product?
Visit our Contact Page or explore our full Product Range for waterers, filters, and other pet essentials. You can also learn more about our mission to deliver practical, pet-safe, and eco-friendly solutions.
Clean water = a healthier, happier pet.
With just a few minutes of weekly care, your automatic pet waterer will deliver fresh, safe hydration day after day.
Browse our best-selling models:
Give your pets the clean, fresh water they deserve — and keep your device in top shape for years to come. 🐾
